10
ENGLISH
TROUblE SHOOTING
PROblEM
SOlUTION
No sound
1. Check the power connection.
2. Make sure that the input selection is set correct by checking the
front LED indicator and the your selected input mode light is on.
For example, if your sound source is iPod, iPod input should be lit.
3. Check the connections between the music source and the Mint
220 Speaker System.
A. For an iPod, make sure it is properly seated in the dock.
B. For a Line-In, make sure both end of connected cable are
firmly connected.
C. For a wireless audio, unplug USB from USB port and follow
the wireless connection procedure on page
TBD
.
4. Make sure that your music source is turned on and any music
is selected to play.
5. Turn up the volume. Make sure that mute is not selected on any
of your input source, such as Mint Remote Control, mute from
your computer’s audio setting, mute from your gaming device, etc.
No proper insert or adaptor for iPod docking
If you cannot locate a proper iPod adaptor shipped with your
iPod purchase, visit www.mintdsi.com to find the right one and
purchase.
blinking Wireless Audio lED Indicator
1. Make sure Mint USB Audio Transmitter is properly plugged in
your computer’s USB port.
2. If it was not plugged in properly, plug and wait until the Wireless
Audio LED indicator of Mint 220 Speaker System stops blinking.
3. If it is still blinking, follow the pairing procedure on page TBD.
4. If you cannot fix this, please contact our customer service.
No sound from wireless PC/Mac connection
1. Make sure the Wireless Audio LED indicator is not blinking.
2. If it is blinking, follow the procedure of “Blinking wireless audio
LED indicator”.
3. Make sure the connected computer is not in mute or at a very
low volume.
4. If you cannot fix this, please contact our customer service.
Speaker sound is not loud enough
Increase the volume on selected input devices:
A. Computer with Mint USB Audio Transmitter.
B. Other devices connected thru Line-In.
TECH SUPPORT AND REPAIR SERVICE
Call toll free number for technical support:
866-xxx-xxxx
, or
Visit www.mintdsi.com/support
