Dryflow EcoForce, Руководство пользователя

Страница: 3 / 9

EcoForce 3
Control:
Designed with SCM control.The machine will close itself when be used
exceed 50s
Feature
Specification
Power supply
Sensing distance
Warm air temp.
Motor speed
Heating power
Overall unit power
Overall dimension
Appearance
220V~50Hz
12+3cm
25000r.p.m
700W
1250W
210mmX182mmX270mm(LxWxH)
chroming painting
40
℃
+10
℃
Dry hands quickly:
Dry hands in 8s-12s if with warm air
Heat switch:
User can choose cold or hotair by the heat switch .
Anion generator:
There is anion generator inside, makes air more fresh and healthy.
Perfume holder:
Put a perfume piece on the holder, you will enjoy the sweet air around as
soon as starting the machine.
Appearance:
Aluminum alloy,strong and beautiful.
Air speed
80m/s
Motor power
550W
1
Problem
Troubleshooting
Contact the
Reason Solution
Not working
No power
Check the power
Sensing distance
Adjust the sensor distance
too short
Sensor device is damaged supplier
No warm air
Heat switch is off Switch on
Heater element fail Contact the supplier
The sensor board cable is loose Contact the supplier
Motor
doesn't work Motor is damaged
1)This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
2)If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Notice:
6
Contact the supplier