28
DRAINAGE
There are two ways of removal collected water produced by the unit.
A. Manual draining: Empty water tank by manual.
B. Continuous draining: Use gravity to drain condensate water by attaching a drain hose.
EMPTYING THE WATER TANK
The water tank built in unit will fill up and shut the unit down once it is full. It will run again once
you empty the water tank and installed properly.
1) When the tank is full, the «FULL» light will turn on.
2) The unit will make a buzzing sound. Press the power button to turn off the machine.
3) To empty the water tank, open the front panel to access the water tank.
4) Grab the handle of the water tank and pull it out horizontally.
5) After disposing of the water, replace the tank and close the front panel.
6) Press the «POWER» button to resume operation.
