DryAIR 2250 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 19

DryAIR 2250 Скачать руководство пользователя страница 4

Warranty Policy

1-2

Warranty Claim Procedure

•

All warranty credits must be processed with the DRYAIR Warranty Claim Form.

•

All warranty parts, unless otherwise specified, are to be returned to DRYAIR along with a completed Warranty Claim Form.

Note: Prior to returning warranty parts, please call for an authorization number and shipping instructions from the Warranty

Department in Canada.

•

Location of Warranty Depot

•

Each warranty claim should only refer to one Serial or Production Schedule numbered unit.

•

Warranty parts are to be tagged with warranty claim number.

•

When claiming for warranty labour, the allowable warranty labour rate will be $45.00/hour. The factory reserves the right to adjust the
number of hours claimed where deemed necessary.

•

The factory may at times specify allowable labour for certain warranty procedures.

•

Mileage and travel time, to and from the customer are not eligible for warranty credit.

•

Freight charges for warranty parts are not eligible for warranty credit.

•

Labour flat rates for component changes

Electrical components - .5 hour
Plumbing components - 1 hour
Electric motor changes - 1 hour

Note: Other labour charges will be at the discretion of DRYAIR.

:

DRYAIR Manufacturing Corp.
400 Service Road, PO Box 126
St. Brieux, SK, Canada
S0K 3V0
Ph. 1 (888) 750-1700

«
...
2
3
4
5
6
...
»

Содержание 2250




















Отзывы:

Нет отзывов