Drucker Diagnostics SERO 12, Руководство оператора

Страница: 13 / 20

Drucker Diagnostics – Customer Service: +1-814-692-7661 – CustomerService@DruckerDiagnostics.com | Page 9
M
ODIFYING A
P
RESET
Save up to 10 custom cycles. The top screen alternates between cycle name and speed.
Select Preset
Setting
Press the CYCLE button to select the Preset Setting you would like
to modify
Access the Menu
Hold the CYCLE button until you hear a double beep. The cycle
number should begin flashing.
Setting by G-Force
(Recommended)
Press and hold the RCF (xg) button while changing the setting,
using the UP and DOWN buttons next to the display. The RPM will
automatically adjust.
Setting Speed
(Alternate)
To change the speed (RPM), use the UP and DOWN buttons next to
the display. The g-force will adjust automatically and can be
verified by pressing the RCF button.
Setting Time Press the UP and DOWN buttons next to the TIME display.
Enter the
Advanced Menu
Press the GEAR button to enter the advanced menu.
Change Brake
Values
While in the advanced menu, navigate to “Brake”. Use the UP and
DOWN buttons next to the TIME screen to turn brake on and off.
Turn Beeper
On or Off
While in the advanced menu, navigate to “Beeper”. Switch ON or
OFF with the UP and DOWN buttons next to the TIME display. This
setting will apply to all cycles.
Naming the Cycle
While in the advanced menu, navigate to the cycle name with the
UP and DOWN arrows. Press the START button. The * indicates the
space selected. Use the UP and DOWN buttons to change
characters, then move to the next space with the right arrow >.
Press the GEAR button to return to the main programming menu.
Save and Exit
Settings Mode
Press the GEAR button, followed by the CYCLE button to exit the
menu.