DRUCK & TEMPERATUR Leitenberger GmbH •
Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • [email protected] •
• www.druck-temperatur.de
www.LR-Cal.net
MANUAL
XP100 und
LRT 1000
LR-
Cal
XP100 and
LRT 1000
LR-
Cal
29
Archiv ,
e fig. C
(26)
Charts (top of fig. ) and tabulates (bo om of fig.
C
C)
the measured values.
Displayed in the table are the minimum value
(MIN), the maximum value (MAX), the arithmec
average ( ) and the standard deviaon (SD).
Ø
(27)
Closes the selected archive entry and returns to
fig. .
A
(16)
Selects the screen language (see chapter „Set
language“).
(28)
Selects the unit system:
Metric: Acvates the metric unit system for all
available measured values (e.g. for use in
connental Europe)
Imperial: Acvates the imperial unit system for all
available measured values (e.g. for use in the USA).
(29)
SSets the screen brightness. This opon can only be
selected by using the cross control below the colour
display.
1. Repeatedly press the „Down“ key on the cross
control unl the scale is selected.
2. Press the „Le“ or „Right“ keys on the cross
control to reduce (Le) or increase (Right) the
screen brightness.
„Se ngs“ screen
You can configure the device als follows in the „Se ngs“ screen:
Se ngs 1/3
(30)
Sets the date and me. This opon can only be
selected by using the cross control below the
colour display.
1. Press the „Down“ key on the cross control
unl the date is selected.
2. Press the OK bu on on the cross control. The enre row is selected.
3. Press the „Le“ or „Right“ keys on the cross control to select the value to be configured.
4. Press the „Up“ or „Down“ keys on the cross control to increase or reduce the value to be
configured
5. Press the OK bu on on the cross control. The row is deselected.
(31)
Opens the next screen.
27
26
16
28
29
30
31
