English
!Caution
When checking/adjusting the burner
pressure, the appliance should be in operation
for at least 10 min.
!Tip
The adjusting screw is located behind the
cover screw.
4.1 Add G31 type plate
Paste the G31 type plate over the G20 type plate, which
is located on the bottom front plate of the casing
(see figure 3).
5. Final check
In order to check whether the appliance is working
properly and safely, you must perform the following
checks before the appliance is used.
5.1. Gastightness
Caution
All connections must be gastight.
!Caution
The gas control valve can be subjected to a
maximum pressure of 50 mbar.
• Check the connections for gastightness.
• Make the connections gastight, if necessary.
5.2. Gas pressure / supply-pressure
The supply-pressure in house installations should be
checked, as they can vary.
Caution
-After conversion to propane, the burner
pressure must be checked and adjusted,
if necessary;
- After maintenance work the burner
pressure must be checked, irrespective
of whether you are using natural gas or
propane, and adjusted if necessary.
Proceed as follows; see fig. 2:
• Check the supply-pressure.
• Contact the gas company if the supply-pressure is not
correct.
!Caution
When checking/adjusting the burner
pressure, the appliance should be in operation
for at least 10 min.
• Adjust the burner pressure, if necessary.
!Tip
The adjusting screw is located behind the
cover screw.
Kamara
OPERATING INSTRUCTIONS
3
Fig. 3
!
!