SECTION 4
NETWORKING
PAGE 88
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
STEP
ACTION
COMMENTS
2.
Click on the “
Connect to a network
”
link to open the window shown in
Figure 42. Click outside this window to
close it.
The label “Connected” will appear beside
each network you are currently
connected to. Any other available
networks are also listed.
The green signal bars indicate the
relative strength of the wireless signal. A
yellow shield indicates those sites that do
not have security enabled. Use caution
when connecting to these sites.
3.
To connect to a network, click on the
network name and select
Connect
. To
disconnect from an active network,
click on the name and select
Disconnect
.
4.
For more detailed information on the
options and settings for these
windows, click on the
Help
icon
Figure 41. Network and Sharing Center Window
