SECTION 3
GETTING STARTED
PAGE 70
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
A djus ting S c reen B rightnes s
The brightness of the LCD display is controlled by adjusting the backlight intensity either
automatically or manually. When you first receive your ARMOR X7, the brightness mode is set
to Automatic. To switch to Manual brightness control, or switch back to Automatic mode, open
ARMORutils and click on the
Backlight Setup
option in the ARMORutils Main dialog window.
This will open the Backlight Setup dialog window shown in Figure 30.
Figure 30. ARMORutils Backlight Setup Dialog Window
A utoma tic B rightnes s A djus tment
Click on the
Automatic
button to change to the automatic brightness mode. The backlight level
will now be controlled by the ambient light sensor (ALS) located on the indicator panel. If the
surrounding light decreases, the brightness will
decrease
proportionally; if the surrounding light
increases, the brightness will
increase
proportionally.