background image

 

 

15 

 

15.  Contraindications of Use 

 

The hazards that have not been entirely eliminated, but that have been deemed acceptable, are 
listed below 
 

 

During the maintenance phase, low pressure spurts of lubricant are possible. (For this 

reason, maintenance operations must be carried out using suitable PPE). 

 

Contact with lubricant during maintenance or filling the reservoir. 

 Protection from direct 

or indirect contact with the lubricant must be ensured by the user of the machine. (See the 
PPE regulation on proper use according to regulations in force). 

 

Use of unsuitable lubricant. 

The characteristics of the lubricant are indicated both on the 

pump and in this Operation and maintenance manual (in the event of any doubt, contact the 
Dropsa S.p.A. Technical Office). 

 
 
 
 

PROHIBITED FLUIDS 

FLUIDS 

HAZARDS 

Lubricants with abrasive additives 

High wear of the contaminated parts 

Lubricants with silicon additives 

Seizing of the pump 

Petrol – solvents – flammable liquids 

Fire – explosion – damage to the gaskets 

Corrosive products 

Corrosion of the pump – damage to personnel 

Water 

Oxidation of the pump 

Food substances 

Contamination of the same 

 

 

 

 

 

 

Содержание 3414100
















Отзывы: