Droll Yankees Classics B-7 Скачать руководство пользователя страница 2

Страница: 2 / 2

05/02/17
L: instructions/all updated instructions/PDF/

Place the base on the feeder and insert both Phillips screws through the base and into the holes in the hanger bar and tighten.

Note: The slot on the end of the hanger bar is used to align the holes in the hanger bar with the base screws using a flat
tipped screwdriver.

6. Install the bail rod in the small holes at the top of the tube. Place the top cap with the bail wire and B-7 washers on the feeder and

insert the ends of the bail wire through the holes in the bail rod. Use pliers to bend the ends of the bail wire to a 90



angle.

Important: Slide both B-7 washers upward to the center of the bail wire before lifting the top cap for filling or when lowering
the bail wire.

B-7F feeder illustrated

Droll Yankees Inc



www.drollyankees.com

Customer Service:

(860) 779-8980 or (800) 352-9164

Hanger Bar

Top Cap

Bail Wire

Bail Rod

Perch Rod

Port

Base

Tube

Baffle

B-7 Washer

Содержание Classics B-7

Страница 1: ...1 1 for removal of the hanger bar 4 Lay the tube on its side on a flat surface positioning the hanger bar horizontal with that surface Using the palm of your hand apply enough pressure on the tube at...

Страница 2: ...top of the tube Place the top cap with the bail wire and B 7 washers on the feeder and insert the ends of the bail wire through the holes in the bail rod Use pliers to bend the ends of the bail wire...