Drolet Escape 1400 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 58

Drolet Escape 1400 Скачать руководство пользователя страница 29

Escape 1400 Insert Installation and Operation Manual

29

•

THE  INSERT  AND  ITS  STAINLESS  STEEL  CHIMNEY  LINER  ARE  TO  BE
INSTALLED  ONLY  WITHIN  A  LINED  MASONRY  CHIMNEY  AND  MASONRY
FIREPLACE  CONFORMING  TO  BUILDING  CODES  FOR  USE  WITH  SOLID  FUEL.
DO  NOT  REMOVE  BRICKS  OR  MORTAR  FROM  THE  EXISTING  FIREPLACE
WHEN INSTALLING THE INSERT.

7.2 Regulations Covering Insert Installation

When installed and operated as described in these instructions, the Escape 1400 wood
insert is suitable for use in residential installations. The Escape 1400 wood insert is not
intended for installation in a bedroom.

In  Canada,  the  CSA  B365  Installation  Code  for  Solid  Fuel  Burning  Appliances  and
Equipment and the CSA C22.1 Canadian National Electrical Code are to be followed in the
absence  of  local  code  requirements.  In  the  USA,  the  ANSI  NFPA  211  Standard  for
Chimneys,  Fireplaces,  Vents  and  Solid  Fuel-Burning  Appliances  and  the  ANSI  NFPA  70
National Electrical Code are to be followed in the absence of local code requirements.

This insert must be installed with a continuous chimney liner of 6” diameter extending from
the  insert  to  the  top  of  the  chimney.  The  chimney  liner  must  conform  to  the  Class  3
requirements  of  CAN/ULC-S635,  Standard  for  Lining  Systems  for  Existing  Masonry  or
Factory-built  Chimneys  and  Vents,  or  CAN/ULC-S640,  Standard  for  Lining  Systems  for
New Masonry Chimneys, UL1777, Standard for Safety for Chimney Liners.

NOTE: The Insert is not approved for use with a so-called “positive flue connection” to the

clay tile of a masonry chimney.

«
...
27
28
29
30
31
...
»

Содержание Escape 1400



























































Отзывы:

Нет отзывов