
Escape 1800 Insert Installation and Operation Manual
48
Appendix 1: Blower Installation
First, attach the fan assembly to
the insert by aligning and inserting
the hooks on each side of the
blower housing into the slots
located on the left and right of the
blower opening below the loading
door (see
DETAIL A
).
To assemble the ash lip, open the
door to facilitate the installation.
Center the ash lip with the fan
assembly previously installed and
push it against the firebox. Then
push down the rear fold of the ash
lip so it clips into the two (2)
brackets welded to the firebox
located below the loading door
(see
DETAIL A
).