Drolet 36C03U TYPE 139, Инструкция по установке и эксплуатации

Страница: 15 / 21

FACE PLATE ASSEMBLY AND INSTALLATION :
ASSEMBLY :
1.
Bolt the face plate top piece to the left piece using two #10-24 x 1/2 bolts and nuts
(B).
2.
Place both louver assemblies in position with their pivot rod inserted through the
face plate side pieces holes (C). The top and bottom louvers are clearly
identified.
WARNING : Do not invert the top and bottom louver assemblies, this would
damage them because top louvers can withstand to higher temperature. They are
marked with stickers at one end.
3. Bolt the face plate left piece to the top using the other two #10-24 x 1/2 bolts and
nuts (B).
4.
Assemble the decorative gold trim using the two corner brackets (A).
5.
Slide the assembled decorative gold trim in place from above the face plate.
6.
Insert the switches in the slots located on the right side of the gold trim (E) and
(F).
14