https://www.droking.com
Note:
091029
Parameters:
Input voltage range: DC 5-36V
Output voltage range: 1.25-32V
Output current: 5A Max (please use it within 4.5A)
Output power: 75W Max
Operating temperature: -40 to +85
℃
Operating frequency: 180KHz
Conversion efficiency : up to 96%
Short circuit protection: Yes
Over temperature protection: Yes
Input reverse polarity protection: No
Installation: 4pcs 3mm screws
(
LED
can
display
correct
value
only
when
input
voltage
higher
than
6
.
5V
.)
Case Installation Instructions:
Installed case:
Board Instructions:
UP
DOWN
FRONT
BACK
LEFT
RIGHT
Input+
Input-
5~36V
Output-
1.25~32V
Digital display
Input voltage
indicator
Output voltage
indicator
Button A: switch ON/OFF
of the digital display
Button B: switch 5 display status
and keep memory when power off
USB
output
interface
Red light: on when in constant current status
and off when in constant voltage status
Blue light: ON when
charging and OFF
when fully charged
Green light: ON
when fully charged
Current potentiometer:
clockwise to increase
Voltage potentiometer:
clockwise to increase
UP
DOWN
BACK
FRONT
LEFT
RIGHT
The input voltage should at least 1.5V higher than the output
voltage.
Out voltage can be continuously adjustable, default output 17V.
Please use the module within 4.5A
Please use the module within 50W. If the pressure difference is
large, please decrease power.
If over temperature, it will automatically shut off the output.
If needs reverse polarity protection at the input terminal, please
in input string into high current diode.
If input voltage is
below 6
.
5V, please measure the output
with a voltmeter to adjust output voltage.