- 15 -
Advanced performance setup
If you would like to reverse any of the stick functions due to personal preference then follow
the instructions below. Be aware that this will change the controls back to front.
Pull the throttle stick to the lowest position. Press and hold the elevator stick for 1 second to
enter setting status, move the stick up/down to choose Set Reverse, push or exit.
Hold down the elevator stick for 2 seconds to exit.
Reversing Channel Setup
0:08:49 M2
0:08:49 M2
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
▶
▶
▶
▶
▶
▶
▶
Exit
Set Reverse
Elevator
Aileron
Rudder
◀
Normal
▶
◀ Revers ▶
◀ Rudder ▶
▶
Exit
If you would like to change the sensitivity of any of the stick functions, then follow Instructions
below. A higher sensitivity value will enable smaller/slower movement.
Pull the throttle stick to the lowest position. Press and hold the elevator stick for 1 second
to enter setting status, move the stick up/down to choose Set Sensitive, push the elevator stick
to the right, press the elevator/ aileron / rudder trim to set the sensitivity. Push the elevator
stick to the right to exit. Hold down the elevator stick for 2 seconds to exit the setup menu.
Sensitivity setup
0:08:49 M2
0:08:49 M2
MAIN MENU
Play Record
Set Real Time
Format SD Card
Set Reverse
Set Sensitive
5.8G Frequence
▶
▶
▶
▶
▶
▶
▶
Exit
Set Sensitive
◀ Normal mode ▶
Elevator
Aileron
Rudder
:
:
:
50
50
50
▶
Exit
