*Head Lift Stand must be used in conjunction with the Rear Stand.
With the stand assembled and the bike sitting on a Rear Stand,
push the pin into the stem. Lower the stand and lift the bike.
Warning:
1. Do not sit on bike while on stand
2. Do not run the engine while the bike is on the stand.
3. Do not run the gears while the bike is on the stand
www.drivenracing.com
5. Measure your stem hole diameter. Insert the bolt and install the pin to secure it.
Read and follow instructions. Failure to follow instructions could result in serious
injury and damage to your bike. Driven Racing and its Dealers cannot assume any
responsibility for damages caused by improper installation or unintended use.
DISCLAIMER
:
