1. Remove contents from box.
2. Place U-shaped section (A) around pole at
desired height.
3. Remove rubber insert (B) if necessary to fit
tubing diameter.
4. Thread scew through holes and fasten using
tightening knob (C). Swivel cup to the desired
angle then tighten the knob.
5. DO NOT over tighten.
installation instructions
Your Drive brand product is warranted to be free of defects in
materials and workmanship for one year of the original con-
sumer purchaser.
This device was built to exacting standards and carefully
inspected prior to shipment. This 1 Year Limited Warranty is an
expression of our confidence in the materials and workman-
ship of our products and our assurance to the consumer of
years of dependable service.
In the event of a defect covered by this warranty, we will, at our
option, repair or replace the device.
This warranty does not cover device failure due to owner mis-
use or negligence, or normal wear and tear. The warranty does
not extend to non-durable components, such as rubber acces-
sories, casters, and grips, which are subject to normal wear
and need periodic replacement.
If you have a question about your Drive device or this warranty,
please contact an authorized Drive dealer.
1 year limited warranty
A
C
B
