Drive Sunfire Gladiator, Руководство пользователя

Страница: 18 / 27

→
Plug the charger power cord (Round head) into the controller
→
Plug the charger power cord into a standard wall outlet. A red and a yellow (if
battery charge is low) LEDs will illuminate.
→
When charging is completed, the yellow LED will turn green.
→
Disconnect the charger power cord from the wall outlet when the batteries are
fully charged. (See Fig 16)
Important!
Do not use for voltage input unless specified. Make sure your present voltage
input (110V or 220V) and adjust manually. (See Fig 17)
plug-in controller plug-in wall outlet (Fig 17)
(Fig 16)
Note:
→
Always charge your batteries in well ventilated areas.
→
The charger is intended for indoor use only. Protect from moisture.
→
For maximum performance , it is recommended that you replace both batteries
at the same time if the batteries are weak.
→
If the chair will not be used for a long period of time, arrange to have the
batteries fully charged for at least once every month.
According to the battery type and condition of the batteries, they usually can be