SEREN
12
DISASSEMBLING / RE-ASSEMBLING
YOUR POWER CHAIR
Joystick Cable Removal
：
Please follow instructions below to remove joystick cable (M) from armrest.
1.Unplug joystick cable (See Fig. 20).
2.Press lock pins underneath front and along seat sides to unlock, then lift chair up to
remove (See Fig. 21) Joystick cable is tied up by 3 cord clips on armrest (See white circle).
Remove cable from armrest.
Seat Removal
：
1.Fold down seat back.
2.Pull up the seat lock lever (N).
3.Lift up on seat assembly (O) to ensure the seat is secure (See Fig. 14).
Body Shroud Removal
：
By using a screw driver to pressing down at the center of the push rivet, to
release the shroud.
1. Remove 3 push rivets (P1) from both front shroud (P) and rear shroud (P2).
2. Follow the arrow's direction to lift up shrouds (See Fig. 22).
Taking apart your power chair enables you to save space when keeping it in storage or
carrying it along in your vehicle. Having power chair disassembled is easier than ever
since no tools are required.
Figure 20
Figure 20
Figure 21
Figure 21
(O)
(M)
(N)
Figure 22
Figure 22
(P1)
(P1)
(P2)
(P)
Instruction Booklet
