Enigma Lightweight Aluminium Wheelchair (LAWC_IFU 12/14)
Page 7 of 12
using the lap belt
A lap belt is to restrain the wheelchair occupant during normal use. The
Ultralightweight wheelchair is suitable for use as a seat in the motor
vehicle, however the lap belt should not be used. Please refer to the
section of using the wheelchair as a seat in a motor vehicle.
The lap belt should be adjusted to suit each user. The length of the belt
can be adjusted by the tri-glides (as shown in the diagram overleaf). The
lap belt has a luggage-style large locking clip to fasten and unfasten the
lap belt. To fasten the lap belt, push the clip in to the receiver until it locks
in the position (which can be heard by an audible click).
When fastened, the lap belt should be tight around the user’s pelvis
without causing discomfort or undue pressure. This will help keep the
user’s hips and pelvis towards the back of the wheelchair. Use the tri-
glides (shown) to adjust the length of the lap belt. The length of the lap
belt should be checked each time the belt is used.
There is a risk of suffocation from users ‘submarining’ (where they slide
down the chair until the lap belt is around the neck area). To reduce the
risk of this, ensure that the lap belt is used under supervision and is used
as instructed.
The lap belt may not be suitable for all users of wheelchairs. Seek
professional medical advice before using the lap belt.
