20
7. INSPECTION AND MAINTENANCE
7.5 MOVING ABOUT
♦
Switch off the power with power key before moving.
Always dismount from the scooter before moving.
♦
Lift the scooter by the chassis, and not by the shroud.
Lifting the scooter by the bumper could cause damage
or injury.
♦
For your safety, always ask for help if required. You will
need two people when moving or lifting the scooter.
If you are on your own, disassemble the scooter
before lifting. Refer to the section below.
1
Warning
Always unplug the rear section electrical connector before separating the two sections.
7.6 ASSEMBLING THE SCOOTER
Suggestion
The assembly process is essentially the disassembly process in reverse. First study the
text and photographs in the disassembly procedure before re-assembling the scooter.
1.Loosen tiller adjustment knob, raise the tiller to the desired position, and then tighten the
tiller adjustment knob.
2.Reinstall the upper seat post at the desired height. Secure with the locking pin and tighten
the seat post knob.
3.Reinstall the batteries by lowering it in to place.
4.Replace the seat and rotate it until it locks into its correct position.
1
Warning
After assembling the Dart make absolutely certain the tiller adjustment knob is fully
tightened.