Drive Proof DP-210, Инструкция по эксплуатации

Страница: 12 / 24

12
* When the recordings exceed the SD card capacity, it deletes image orderly from the oldest one.
Depending on the mode of recording, LED blinks.
• Odinary Recording : The POWER LED blinks at very short intervals once
per second.
- Within the GPS coverage(Green) / Out of the GPS coverage(Red)
• Event Recording : The POWER LED blinks five times per second (Red).
• MUTE : AUDIO LED flickers and melody sound will be muted.
• Voice Recording : AUDIO LED lights up.
<The texts on monitor with connection of video>
(1) If the DP-210 is powered on after the SD card has been inserted, the current status is displayed on the
monitor.
(2) If the SD card is removed after the DP-210 is powered on, DP-210 is re-working. After that, DP-210 will
be same status with below (3).
(3) If DP-210 is power on without SD card, beep is sounded continuously and current status of DP-210 is
not showing on monitor.
(Event : Output “GSENSOR” on monitor)
(If the SD card has not formatted more than 1 week)
Date O (O : GPS Connection / X : GPS no connection)
FORMAT