FIVE POINT “H” HARNESS & PELVIC BELT ADJUSTMENT
1. Place user in the chair and position child’s hips.
2. Buckle the pelvic positioning belt to the proper position.
3. Connect both straps of the “H” harness to the pelvic
positioning belt.
4. Adjust both shoulder straps using the adjuster (Fig 6A)
to get a snug fit.
5. To adjust the height of the attachment point of the
shoulder straps, undo the knob on the back panel, and
take the insert out of the grommet (Fig 7). Place the
insert at the required position and tighten in place with
the knob.
A
figure 6
figure 7
FOOTREST ADJUSTMENTS
To Adjust Or Remove Footrest:
1. Pull out the locking pin (Fig. 8A).
2. Move the footplate extension tube up or down to the
desired position.
3. Align the holes of the footrest with the holes of the
housing bracket.
4. Put the locking pin back in place.
A
figure 8
Range Adjustment
To modify the range of adjustment of the footrest by
reversing the housing bracket:
1. Remove footrest.
2. Remove both screws from the housing bracket (Fig 9A).
3. Relocate the housing facing up or down as desired.
4. Put both screws back in place.
figure 9
A
Standard
Position
(Down)
Reversed
Position
(Up)
