Drive Medical GLADIATOR GT807, Руководство пользователя

Страница: 13 / 24

5. B AT T E RY CH A RG I N G AN D CARE
5.1 CHARGING THE BATTERY
Follow the procedure below step by step:
1. Turn the power switch to (OFF)
2. Connect the charger’s power cord into the power outlet.
3. Open the charging socket cap on the scooter’s tiller. Connect the
charger’s round plug to the charging socket.
4. Turn on the switch on the charger.
5. Both the charger’s red and orange LEDs will be lit when beginning
charging. The charging duration is about 6 hours. To ensure
optimum performance a 10-hour charge is recommended. We do
not recommend a charging more than 24 consecutive hours.
6. Both the charger’s LEDs will be lit during the charging process.
The orange LED will turn green when charging is complete.
7. Turn off the charger; disconnect the power cord and the round plug from charger socket on the
scooter.
Warning
The fan inside the charger will be activated accordingly when you turn on the charger. If the fan
does not work when connected to the charger or the green light is not showing, DO NOT use this
charger. It may lead to overheating of the charger and cause a fire as a result.
There is a red LED present on the charger to illustrate operation. If this LED does not illuminate
the charger is defective, please contact your dealer.
Attention
While gripping or folding the handle bar, beware of finger or hands caught in the handle area.
While returning the battery pack to the battery pack cavity of shroud, beware of finger or hands.
A flap on the end of battery pack can be opened to place your bag not over 6.5 lbs.
Warning
Keep away from flammable objects while charging as it may lead to fire or explosion of battery.
Do not smoke while charging as the battery may release hydrogen gas. Always charge your battery
in a well-ventilated space.
Never connect or disconnect the plug or cord with wet hands while charging. Do not connect or
disconnect the plug or cord when they are wet, it may lead to electric shock.
NOTE: The immovable function will be activated while your scooter is in charging status, which will
make your scooter not run.