Drive Medical GentleFeed+ MQ9130, Инструкции и сборка

Страница: 7 / 14

WARNING: Avoid the following, which could lead to minor injury:
• DO NOT wrap cord around adapter body.
• Use only the power adapter that comes with the Gentlefeed + breast pump.
• Pump only with the breast pump in an upright position.
• DO NOT shorten tubing.
• Make sure the voltage of the power adapter is compatible with the power
source.
• Plug the power adapter into the breast pump first, then into the power source.
• DO NOT use antibacterial or abrasive cleaners/detergents when cleaning
breast pump or breast pump parts.
• Never put breast pump motor in water or sterilizer, as permanent damage can
be caused to the device.
• DO NOT attempt to remove the breast shield from your breast while pumping.
Turn the breast pump off and break the seal between your breast and breast
shield with your finger, then remove the breast shield from your breast.
• If pumping is uncomfortable or causing pain, turn the unit off, break the seal
between the breast and the breast shield with your finger and remove breast
shield from your breast.
• If experiencing pain in the breast or nipple, discontinue pumping by shutting
off the device or breaking the suction with your finger, even if you think the
pump is not the source of the pain.
NOTES: To avoid health risk and reduce the risk of injury:
• Plastic bottles and component parts become brittle when frozen and may
break when dropped.
• Take appropriate care in handling bottles and components.
• Do not use the breast milk if bottles or components become damaged.
Cleaning Instructions
Basic Cleaning Method
1. Rinse each piece that comes into contact with the body and or
milk with cool water immediately after pumping.
2. Wash each piece separately using liquid dishwashing soap and
plenty of warm water.
3. Rinse each piece thoroughly with hot water for 10-15 seconds.
4. Place the pieces neatly on a clean paper towel or in a clean drying
rack and allow them to air dry.
5. Avoid using cloth towels to dry the pump parts because they can
carry germs and bacteria that may contaminate the breast milk.
6. Once the pump parts are dry, assemble the pump before storage
or use.
7. Try not to touch the inside of any parts that will come in contact
with your breast milk.