25
INSPECTION AND MAINTENANCE
DISASSEMBLING THE SCOOTER
• The Daytona series can be disassembled to five pieces, the seat (26 lbs.), the front section
(45 lbs.), the rear section (39 lbs.),and batteries (25 lbs.),without any tools. Please follow
the steps and photographs below.
1. Switch off the scooter, unscrew the seat hand wheel and remove seat. Be careful not
let the seat post drop when removing.
2. Lift up the rear shroud to remove.
3. Disconnect the batteries by disconnecting the two red connectors and two black
connectors.
4.Undo the hook-and-loop strap and remove the batteries.
5. Loosen the tiller adjustment knob and fold down to the tiller and retighten knob.
6. Remove the lock pin.
7. Unplug the front-to rear harness (blue and red connector).
8. Press down on the rear bumper to pivot the scooter’s rear section is standing vertically
on its rear bumper.
9. Lift the front section up until the lower pegs are no longer in the curved locking
brackets. Carefully lift the front section away from the rear section.
