984P Plastic Snap Pliers – Round, Star and Heart Instructions
Fabric Preparation
for Round, Star, and
Heart Snaps
Instructions for Applying Round, Star and Heart Plastic Snaps
Instructions for Making Holes in Fabric
Use two layers of light to medium-weight fabric, reinforced with interfacing.
Mark position of snaps on topside and underside of garment.
Test a snap on swatch of fabric.
Pliers Tools:
Snap Parts:
Inserting Tools:
Insert small side of metal die base
into the pressing head. Insert metal
die base in one side of pliers and
coral cap holder in other side.
Applying Decorative Cap & Stud
(Topside of garment)
:
1. Insert prong of decorative cap
into hole.
2. Place stud over prong.
3. Position decorative cap in coral
cap holder.
4. Squeeze pliers firmly to apply snap. Check
for tightness; if necessary, rotate pliers and
squeeze again to completely flatten post.
Wrong side of fabric
2.
Awl:
Protective Cover:
Remove protective cover from point of awl. Replace for storage.
Making Holes:
1. Center point of awl over mark.
2. Push awl through fabric to make a small hole.
Heart:
Round:
Star:
Cap
Socket
Round
Cap
Stud
Coral Cap Holder
Pressing Head
Metal Die Base
Wrong side
of fabric
Right side
of fabric
1.
Wrong side of fabric
3.
Wrong side
of fabric
Right side
of fabric
4.