Drinkwell PAGODA-RD-KA-41, Руководство по эксплуатации

Страница: 12 / 32

www.petsafe.net 13 12 www.petsafe.net
EN
KO
5. Once the Pump is completely disassembled,
you can clean the parts with warm water and
soap. Use a cotton swab or the “motor
brush” from the Drinkwell
* Cleaning Kit to
clean inside the Pump’s motor cavity and
remove any build-up (
Fig. 16
). For added
disinfecting and hard water removal, clean
the Pump’s motor with a diluted white vinegar solution (20% white vinegar and
80% water).
Important:
Be sure to rinse thoroughly with fresh water.
6. Once the parts are clean and well rinsed, you can reassemble the Pump for use.
a) Replace the Impeller.
b) Replace the Intake Plate.
c) Replace the Faceplate.
Pet Fountain Reassembly
1. Place the Foam Filter around the Pump (
Fig. 17
).
Take the Bowl and place Pump inside the square
indention. With the Bowl positioned so the raised
post is at the top right corner of the square, make
sure the Pump is positioned so that the Pump
Outflow is positioned in the bottom left corner of
the square (
Fig. 18
).
2. Press down on the Pump to engage the suction
cups. Once the Pump is securely in place, feed
the In-Line Plug of the electrical power cord
over and through the raised post and out the
notch in the base of the Bowl (
Fig. 19 ).
Fig. 16
Electrical
power
cord rests
on top
Fig. 17
Pump
Outflow
Fig. 18
Fig. 19
Notch