Getting Started
Getting Started
Getting Started
2
Getting Started
3
Installation Components List
A:
A
B
C
D
25 ft. Coil of 1/4 in. White PP Tubing
B:
1/4 in. Compression To Quick Connect Adapter
C:
1/4 in. Quick Connect Shutoff Valve
D:
(1/4 in. Custom x 3/8 in. Male x 3/8 in. Female x
Compression Steel Angle Stop Valve Adapter)
GETTING STARTED
Before we proceed with your installation, we must first identify how and where to install
your new DRINKPOD ONYX. This will be the most complicated part of the installation
process. Don’t be intimidated! We’ve worked hard to write the best set of instructions you’ll
ever read. Be prepared to feel like a DIY pro when you’re finished!
Configuration & Location
First, let’s decide
where
you want to install your DRINKPOD ONYX. In almost all cases, this
easily decided by answering two simple questions.
1.
What water sources are available?
If you’re not sure what you have, or how to check,
“Appendix A - Water Sources” on page 24
for pictures and more information.
A.
Water Accessory Line
(typically refrigerator ice maker line/source)
Example Installation #1.1
Accessory Water Line Source
BEFORE
Accessory Water Source
(Ice Maker)
AFTER
Accessory Water Source
(Ice Maker)
DRINKPOD
(Ice Maker Connection)
Diagram 2.1.1-A
Accessory Water Line Source
B.
Sink Faucet Cold Water Line (i.e. underneath your kitchen sink)
source
