Installing Your Drinkpod
Installing Your Drinkpod
2-8
connection is almost certainly a ½ in. (Nominal/NPT) fitting. If you have a 15/16 in. and
a 1 in. wrench, you can check to confirm by attempting to loosen the connection (there
is 1/16 in. range of variance between different plumbing fittings).
IF THAT DOESN’T FIT,
you have an extremely rare setup, and should contact a plumber.
IF THE LARGER
WRENCH DOES FIT, we don’t provide 1/2 in. adapter in your kit (only 2.5% of our
customers require it), but we’d be more than happy to ship you one for free upon request.
Call us at
1-844-374-6576
, or email us at
.
Or, if you don’t
want to wait, you can pick one up at your local hardware store. Ask for a
1/2 in (FIP) x
1/2 in. (MIP) x 1/4 in (OD) Push-to-Connect Angle Stop Adapter Valve
.
Diagram 2.3(B).5
Detach Cold Water Feed Line
6. Next, screw the bottom (female) end of
to the
top (male) end of
using your hand. Then tighten
using medium force with the same wrench (11/16 in.) you used to remove
.
