Drinkpod 1000 Pro Series, Руководство по установке

Страница: 10 / 67

Getting Started
Getting Started
2-8
Alternative Configuration
Example Installation #3
Accessory Water Line Source - Low Pressure Alternative
BEFORE
Accessory
Water Source
Refrigerator
(Ice Maker Connection)
AFTER
Accessory
Water Source
Refrigerator
(Ice Maker Connection)
1000
Pro Series
Diagram 2.1.3 Low Water Pressure Alternative (Shared in Parallel)
4. It’s almost time to choose where to install your new Drinkpod 1000 Pro Series. You should
have a pretty good idea based on available space and whichever configuration you
selected. There’s only one remaining factor you need to consider, and that is your tubing
(water lines).
5. Your water source, 1000 Pro Series, and any accessory appliances all need to be
connected by the white ¼ in. PP tubing (included in your installation kit) or existing
water line hose. Take a moment to visualize where you’ll need to run your water tubing,
and visually inspect any potential trouble areas, and adjust your plans accordingly.
Below are a two examples:
A. Cabinets separating your 1000 Pro Series from a water source or appliance,
requiring you to route tubing over/under, or drill holes.
B. Lack of vertical access from your water source under your sink to above your
counter-top, requiring drilling holes to run the tubing inside your cabinets, or
through your counter-top.
Congratulations, the most difficult part is out of the way! Let’s get started
source
acc.
P