Drill Master 95578 Скачать руководство пользователя

Страница: 14 / 20

SKU 95578

For technical questions, please call 1-800-444-3353.

Page 14

c. Rotate the wheel 45 degrees and

repeat the test until the entire wheel

has been checked.

d. An undamaged wheel will give a

clear tone. If cracked, there will be a

dead sound and not a clear ring.

5. For wheels with paper gaskets

(blotters) or metal gaskets: Slip the

grinding wheel onto the Spindle with

the gasket first. The gasket should

be centered on the grinding wheel

and the wheel and gasket should rest

flat against the Inner Flange.

WARNING: To prevent serious

injury, gaskets must be used for all

grinding wheels they are provided

with. Gaskets help prevent

grinding wheel damage and wheel

slippage, causes of wheel failure.

Spindle

Inner Flange

The raised portions on the Inner

Flange must line up with the flats on

the spindle so that they lock together,

as shown above.

7. Thread the Outer Flange onto the

Spindle. Using the Pin Wrench,

tighten only enough so that the wheel

is securely held on the spindle.

WARNING: To prevent serious

injury, do not overtighten flange.

Overtightening can damage the

wheel, causing wheel failure.

Installing a Threaded Accessory

TO PREVENT

INJURY:

Wear heavy-duty work gloves

when handling wire wheels

and brushes. These

accessories are sharp and

can cause injury.

1. The accessory MUST be:

• rated to at least 11,000 RPM.

• no larger than 4-1/2” in diameter.

• fitted with a threaded opening of

5/8” x 11 TPI.

• undamaged.

• a sanding disc and backing pad, a

sanding flap disc, a wire wheel or

a wire cup brush (accessories not

included).

2. Press in and hold the Spindle Lock

Button to prevent the Spindle from

turning.

3. Remove the Outer Flange and the

Inner Flange and keep in a safe

place.

4. Thread disc accessory firmly onto

the Spindle. Wrench tighten onto the

spindle.

Work Piece and Work Area Set Up

1. Designate a work area that is clean

and well-lit. The work area must not

allow access by children or pets to

prevent distraction and injury.

2. Route the power cord along a safe

route to reach the work area without

creating a tripping hazard or exposing

the power cord to possible damage.

Содержание 95578





















Результаты поиска

Содержание 95578

Отзывы:

Похожие инструкции для 95578

Бренды по названию

Популярные бренды

Drill Master 95578, Руководство по установке и эксплуатации

Результаты поиска

Содержание 95578

Отзывы:

Похожие инструкции для 95578

Бренды по названию

Популярные бренды