manualshive.com logo in svg

Drill Master 93816, Руководство по сборке и эксплуатации

Поделиться
Скачать
Drill Master 93816 Скачать руководство пользователя страница 12

SKU 93816

For technical questions, please call 1-800-444-3353.

Page 12

Flashlight

WARNING: Always make sure the Battery (47) of the Flashlight is removed and the Bulb

(9a) is allowed to cool 

prior to making any adjustments to the tool.

 

1.

Insert the fully charged Battery (47) in the Flashlight’s Handle, and make sure that
the Battery snaps into place on the Handle.
(See illustration above.)

2.

Slide the Switch Button (7a) on the Handle to the ON position.

3.

To turn off the Flashlight, slide the Switch Button (7a) to its OFF position.

4.

Bulb (9a) Replacement:
A. Unscrew the Holding Ring (4a) and remove the Lens (6a), and Reflector (5a).

You can now access the spare Bulb hidden behind the Reflector (5a) in the
Lamp Housing (3a).

B. Remove the Bulb Bracket (11a) by turning it clockwise.
C. Remove the old Bulb (9a).  Transfer the Bulb Spring (10a) from the old Bulb to

the new Bulb.

D. Insert a Bulb of the same type and wattage.  Align the Bulb Bracket (11a) with

the slots in the Reflector, push and hold it in, and turn it counterclockwise.

E. Put the Reflector (5a) back in place.  Reattach the Lens (6a) and Holding Ring

(4a).

Содержание 93816























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды