1.
WARNING! Always turn the Power Switch (20) to its “OFF” position,
and unplug the Charger (41) from its electrical outlet before performing any
inspection, maintenance, or cleaning.
2.
BEFORE EACH USE, inspect the general condition of the Cordless Drill. Check
for misalignment or binding of moving parts, cracked or broken parts, leaking
Battery Pack, damaged Charger wiring, chipped or broken Drill Bits, and any
other condition that may affect its safe operation. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Do not use damaged equipment.
3.
Battery Pack (27) precautions: Never burn Batteries, as they can explode in a
fire. Do not charge leaking Batteries. Only a qualified service technician should
perform maintenance on the Battery Pack. Contact local solid waste authorities
for instructions on correct disposal or recycling of the Battery Pack.
4.
DAILY: With a soft brush or cloth, remove all dirt and debris from the Cordless Drill.
Do not immerse the Cordless Drill in any liquids.
5.
When storing: Always remove the Battery Pack (27) from the Cordless Drill. Keep
the Cordless Drill and its accessories in a clean, dry location and out of childrens
reach.
SKU 92383 For technical questions, please call 1-800-444-3353
PAGE 10
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER
THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
INSPECTION, MAINTENANCE, AND CLEANING
Note: Servicing of this tool should only be done by a qualified service technician.
