background image

Page 5

For technical questions, please call 1-800-444-3353.

Item 69947

SAFET

y

Op

ERA

TION

M

AINTENAN

c

E

SETU

p

12. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic 

fields in close proximity to heart pacemaker 

could cause pacemaker interference or 

pacemaker failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone. 

• Do not use with power switch locked on. 

• Properly maintain and inspect 

to avoid electrical shock. 

• Properly ground power cord.  

Ground Fault Circuit Interrupter (GFCI) 

should also be implemented – 

it prevents sustained electrical shock.

13. WARNING: Some dust created by power 

sanding, sawing, grinding, drilling, and 

other construction activities, contains 

chemicals known [to the State of California] 

to cause cancer, birth defects or other 

reproductive harm.  Some examples of 

these chemicals are: 

• Lead from lead-based paints 

• Crystalline silica from bricks and cement or 

other masonry products 

• Arsenic and chromium from 

chemically treated lumber 

Your risk from these exposures varies, 

depending on how often you do this type 

of work.  To reduce your exposure to these 

chemicals: work in a well ventilated area, and 

work with approved safety equipment, such as 

those dust masks that are specially designed 

to filter out microscopic particles.   

(California Health & Safety Code 

§ 25249.5, 

et seq.

)

14. WARNING: Handling the cord on this product 

will expose you to lead, a chemical known to 

the State of California to cause cancer, and 

birth defects or other reproductive harm. Wash 

hands after handling.   

(California Health & Safety Code 

§ 25249.5, 

et seq.

)

15. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by 

the operator that common sense and caution 

are factors which cannot be built into this 

product, but must be supplied by the operator.

Vibration Safety

This tool vibrates during use.  

Repeated or long-term exposure to vibration may 

cause temporary or permanent physical injury, 

particularly to the hands, arms and shoulders.  

To reduce the risk of vibration-related injury:

1.  Anyone using vibrating tools regularly or for 

an extended period should first be examined 

by a doctor and then have regular medical 

check-ups to ensure medical problems are 

not being caused or worsened from use.  

Pregnant women or people who have impaired 

blood circulation to the hand, past hand 

injuries, nervous system disorders, diabetes, 

or Raynaud’s Disease should not use this tool.  

If you feel any symptoms related to 

vibration (such as tingling, numbness, 

and white or blue fingers), seek medical 

advice as soon as possible.

2.  Do not smoke during use.  Nicotine reduces 

the blood supply to the hands and fingers, 

increasing the risk of vibration-related injury.

3.  Wear suitable gloves to reduce the 

vibration effects on the user.

4.  Use tools with the lowest vibration 

when there is a choice.

5.  Include vibration-free periods 

each day of work.

6.  Grip tool as lightly as possible 

(while still keeping safe control of it).  

Let the tool do the work.

7.  To reduce vibration, maintain the tool as 

explained in this manual.  If any abnormal 

vibration occurs, stop use immediately.

 SAVE THESE INSTRUcTIONS.

Содержание 69947

















Отзывы: