manualshive.com logo in svg

Drill Master 69230, Руководство пользователя

Поделиться
Скачать
Drill Master 69230 Скачать руководство пользователя страница 10

Page 10

For technical questions, please call 1-800-444-3353.

Item 69230 

        

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Operating Instructions

  Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this 

manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: 

Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its 

electrical outlet before assembling or making any adjustments to the tool.

TO PREVENT SERIOUS INJURY: 

DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED.  

Moving guards must move freely and close instantly.

Installing the Blade

1.  Remove the Table Leaf to access the Lower Blade Guard. 

Empty any water in the tank. 

 

 

 

 

 

 

 

 

 

 

 

2.  Flip open the Upper Blade Guard. Unthread and remove the 

Screw and Washer holding the Lower Blade Guard. Remove 

the Lower Blade Guard.

Figure 5

Figure 6

Lower Blade 

Guard

Содержание 69230

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды