background image

SKU 42307 

For technical questions, please call 1-800-444-3353. 

Page 4

or other part that is damaged should 

be properly repaired or replaced.
DIRECTION OF FEED. Feed work 

20. 

into a blade or cutter against the 

direction of rotation of the blade or 

cutter only.
NEVER LEAVE TOOL RUNNING 

21. 

UNATTENDED. TURN POWER OFF. 

Don’t leave tool until it comes to a 

complete stop.

grOUNdiNg iNSTrUCTiONS

 

TO PrEVENT 

ElECTriC SHOCk 

ANd dEATH FrOM 

iNCOrrECT grOUNdiNg 

WirE CONNECTiON 

rEAd ANd FOllOW THESE 

iNSTrUCTiONS:

110-120 V~ double insulated 

Tools: Tools with Two Prong 

Plugs

Outlets for 2-Prong Plug

To reduce the risk of electric shock, 

1. 

double insulated equipment has a po-

larized plug (one blade is wider than 

the other). This plug will fit in a polar

-

ized outlet only one way. If the plug 

does not fit fully in the outlet, reverse 

the plug. If it still does not fit, contact 

a qualified electrician to install the 

proper outlet. Do not change the plug 

in any way.
Double insulated tools may be used 

2. 

in either of the 120 volt outlets shown 

in the preceding illustration.  

(See 

Outlets for 2-Prong Plug.)

Miter Saw Safety Warnings

For Your Own Safety read instruction 

Manual Before Operating Miter Saw

Wear eye protection.

1. 

Keep hands out of path of saw blade.

2. 

Do not operate saw without guards in 

3. 

place.
Do not perform any operation free-

4. 

hand.
Never reach around saw blade.

5. 

Turn off tool and wait for saw blade 

6. 

to stop before moving workpiece or 

changing settings.
Disconnect power before changing 

7. 

blade or servicing.
Return all guards to original position if 

8. 

any are moved during blade replace-

ment.  Check all guards for proper 

operation after service.

dO NOT OPErATE WiTH ANY 

9. 

gUArd diSABlEd, dAMAgEd, 

Or rEMOVEd.  Moving guards 

must move freely and close in-

stantly.

The use of accessories or attach-

10. 

ments not recommended by the 

manufacturer may result in a risk of 

injury to persons.
When servicing use only identical 

11. 

replacement parts.

Содержание 42307













Отзывы: