DrillMasters Eldorado Tool, Inc.
Page 7 of 16
2.2 Machine Noise
The equivalent continuous sound pressure level of the grinding machine is less than 80 dB(A) .
2.3 Function of the machine
Machine base
- this is a found structure to accommodate the entire machine including the botton
box, the slide part and grinding fixture.
- precision-finished mounting surfaces
Slide Part
- constructed with linear guideways
- the profile guide beads are permanently bolted onto the machine
Grinding Fixture
- the grinding fixture is designed for low volume production re-sharpening of single flute
gundrills.
- The fixture may be installed on a
DrillMasters Eldorado Tool
grinding machine MD1, or a
standard tool grinding
machine. The desired angles are on the grinding fixture using graduated
scales.
Grinding fixture PS
- the grinding fixture PS was developed for re-sharpening single flute gundrill within a diameter
range from 0.5~6.0mm.
- The fixture may be installed on a
DrillMasters Eldorado Tool
grinding machine MD1 or a
standard tool grinding
machine.
2.4
Legend of the Machine
1. machine base
2. slide part
3. grinding fixture
4. grinding fixture PS
3.
Installation
3.1 Transport
CAUTION:
Incorrect handling when installing and transporting the machine can cause serious injuries. Observe
safety regulations during unloading. Presence or working under suspended loads is strictly forbidden.
3.2 Installation
3.2.1 Setting-up and alignment of the machine