Drija Latino 60 Electrico, Руководство пользователя

Страница: 8 / 12

User Manual
BUILT-IN OVEN |
LATINO 60 ELÉCTRICO
7
For added security, an additional child safety device is available in our central office and in our
authorized service centers (see attached list). When ordering, enter the code: BAB followed by
the device model. The model is stamped on the plate that is seen on the front of the oven
when the door is opened.
Disassembly / assembly of the oven door
To facilitate cleaning the inside of your oven, you can remove the oven door as follows.

Open the door completely and raise the 2 levers "B"

Now, by slightly closing the door, you can lift it by pulling the hooks "A" as shown. To
reassemble the door:

With the door upright, insert the two hooks "A" into the slots;

Make sure that the seat "D" is perfectly hooked on the edge of the groove (move the
oven door back and forth slightly);

Keep the oven door fully open, unhook the 2 levers "B" down and then close the door
again.
Removable glazing door instruction
The oven door is composed of 3 glass panels and has vents on the top and bottom. When the
oven is running, air circulates through the door to keep the outside panel cool. If condensation
has made its way between the glass panels, the door can be removed to clean between the
panels.
Remove the door according to the instructions above and place it on a protective surface (for
example, on a tablecloth) to prevent scratching. The door handle should align with the edge of
the table. Make sure the glass is flat to prevent breakage during cleaning.
1. Press the button on the left and right side of the door, remove the top rail. (Figure 1)
2. Remove the inner glass slowly (Fig. 2)
3. loose clips. (Fig. 3)
4. Remove the glass from the middle. (Fig. 4)