User manual
ELECTRIC STOVE BUILT - IN | BARI 60
13
INSTALLING THE APPLIANCE
Cut a hole in the worktop that corresponds with the drawings shown above.
IMPORTANT:
You must have at least 25-75 mm under the gap between the equipment
and any surface below its.
Carefully turn the hob upside down and place it on a cushioned mat.
Apply the sealing strip provided around the edge of the appliance.
The protective covering must be removed from both sides.
Do not leave a gap in the sealing agent or overlap the thickness.
IMPORTANT:
Do not use a silicon sealant to seal the appliance against the aperture.
This will make it difficult to remove the hob from the aperture in future, particularly if it
needs to be serviced.
Содержание BARI 60
Страница 1: ...User Manual BARI 60 Voltage 220V 60Hz ...