Dri-Air Industries ARID-X10C, Руководство по эксплуатации

Страница: 13 / 22

Page 13
DRI-AIR
INDUSTRIES, INC
.
OPERATING MANUAL - ARID-X10C FLOOR MOUNT DRYER
Revision 7/28/04
When operating this dryer please follow the
procedures detailed below:
Routine Operation
The dryer should be operated in a dry
environment at ambient temperatures between 50
and 110 degrees F (10-44 deg. C). The unit
should be situated so that the air hoses are not
crimped or restricted after connection with the
material hopper and the controls are easily
accessible to the operator.
When moving the dryer allow the dryer to cool
completely before handling. Recheck the hose
and thermocouple connections to ensure that they
are tight.
To shut the dryer down, press the OFF button on
the Control Panel and press the rocker switch to
the off position. Always unplug the unit when
not in operation.
Emergency Shutdown
In the event that a condition should arise that
requires the operator to immediately halt the
dryer’s operation, the operator can press the
rocker switch to the off position and the unit will
shut down completely. Remove the power plug
from the facilty outlet to cut all power from the
dryer.
Hopper Maintenance
1. Always clean hopper interior, air inlet port
and diffuser basket prior to adding or
changing materials.
2. Never over-fill the hopper. Material should
not obstruct the exhaust port at the top of the
hopper.
ROUTINE OPERATION &
MAINTENANCE
PROCEDURES