Drew Technologies DashDAQ XL, Инструкция по эксплуатации, Страница: 22 / 52

22
To upload your own sounds:
1. Sound files must have these attributes:
Extension: .wav
Encoding: PCM (uncompressed)
Size: 8 or 16 bit signed integer
Sample Rate: 22050, 11025, 5512 or 5513 KHZ
Channels: Stereo or Mono
Length: Less than 10 seconds
2. Once you have your sound file, put it in the transfer folder on your SD card.
3. Insert the SD into the DashDAQ, and turn the unit on.
4. From the Main Menu tap on [Setup], then [Memory Card], then [Install], then [Sound].
5. Select which sound you wish to install and tap [Install].
You can now specify this warning sound for any High or Low warning in the gauges.
MEDIA PLAYER
The Media player can be accessed by tapping on [Entertainment] from the Main Menu. The Media player allows you to play various
audio and video files. To make media playable for DashDAQ, the media files must be placed in a folder called “media” on the SD card.
This folder must be located in the root directory of the card.
SETTING SIGNAL/GRAPH COLORS
Setting different colors for a gauge makes it easier to see, but is especially helpful on the graphing gauge. To change a gauge’s color:
1. Tap on the red, green, and blue swatch in the corner of the box.
2. Tap on a color to select it. Tap [Save].
3. Tap [Save] to return to the gauges.