5
SAVE THESE INSTRUCTIONS- FOR HOUSEHOLD USE ONLY
Important Safeguards (cont...)
Do not overfill the kettle. Always observe
the MAX filling mark in the interior of the
kettle. Otherwise, hot water could splash
and overflow, causing severe scalds.
Always remove the kettle from the power
base and remove the lid when filling the
kettle. Do not preheat the kettle while
it is still empty. Always ensure that there
are at least 0.5 litres of water in the kettle
before operation. Only use the appliance
for heating clear water. Do not add any
food or food additives. Do not fill with
milk or any other beverages into the
kettle. Do not place any foreign objects
into the kettle. There is no warranty
claim of the purchaser, if the damaged
or defect of the appliance is caused by
inappropriate treatment.
The lid can be opened easily by pressing
the lid opening button. Do not force
the lid open. Always close the lid before
starting operations.
Do not use abrasive cleaners or cleaning
pads for cleaning the appliance or any
part of it. DO not clean the appliance
with any chemicals (e.g. bleach). Do not
use any hard or sharp-edged objects for
operation or cleaning.
DO NOT place the appliance or power
cord in an automatic dishwasher.
IMPORTANT SAFEGUARDS FOR
ELECTRICAL APPLIANCES
Carefully read all instructions before
opening the appliance and save for
future reference.
Place the appliance near a suitable
wall power socket and connect the
appliance directly to a protected mains
power supply with protective conductor
(earth/ground) connected properly.
For this, always unwind the power cord
completely. Do not use any extension
cord or multi-socket outlet. Ensure that
the voltage rating of your mains power
supply corresponds to the voltage
requirements of the appliance (220-240V,
50/60Hz, AC, rated for at least 10A).
The power outlet socket must be
installed separately to avoid interference
with other appliances.
Do not let the plug or power cord hang
over the edge of the table or counter.
Ensure that no one will pull the appliance
by the power cord or entangle in the
power cord. Always grasp the plug to
disconnect the power cord. Do not touch
the power plug or appliance with wet
hands while the appliance is connected
to the mains power supply.
Always unplug the appliance and remove
the kettle before moving or cleaning the
power base. Do not leave the power
base unattended when it is connected to
the power supply.
The power cord may not touch hot
surfaces or sharp edges. Do not place
the appliance on a power cord. If the
power cord is obviously damaged and/
or gets hot during operation, replace
the power cord completely. DO NOT
attempt to repair any power cord. To
avoid risk of electric shock: Always
immediately wipe dry spilled liquids and
condensate. Do not place or immerse
Digital Kettle Pro Inst.indd 5
09/02/2021 14:24
