Drester Boxer Quattro S DB44S Скачать руководство пользователя страница 3

3

16014 rev 2022-02-01

PURPOSE OF THE MACHINE

The unit is intended for cleaning of air  -driven spray-guns us-
ing either thinner-based solvents or water-based solvents.

Each side of the unit has two separate areas for cleaning:
1.  An automatic washer (items 1A and 1B illustration 1), 

intended for cleaning of spray-guns with gravity fed paint-
cups.

2.  A sink (items 2A and 2B illustration 1), intended for manual 

cleaning of other tools used in connection with vehicle 
paint-jobs like: spray-guns with suction fed paint-cups, filler 
scrapers, paint brushes and such.

All other use of the unit are not allowed like:
–  Emptying excess paint into the unit
–  Cleaning of electric chargeable items
–  Collecting of various waste
–  Cleaning of textile materials
–  Storing of items
–  Cleaning of hands or other parts of the human body
–  Cleaning of any items for food or drinks

ASSEMBLY

–  First of all, check if the machine has been damaged during 

the transport. Remove the packaging and check again that 
the machine has not been damaged during the transport. If 
so, report this immediately to the transport company.

–  Fit the flange for the extraction (item 3 illustration 1) with 

the 4 screws included (see detail illustration 12)

–  Fit the glass window into place (item 13 illustration 1) (see 

detail illustration 13)

–  The air-line on the left side of the unit (item 4 illustration 1) 

is during transport placed inside the unit. Take it out, and 
fasten it with the magnet in a convenient place on the left 
side. The air-line can be routed either outside the side-wall, 
or through the gap between the front lid and the side wall.

 

This air-line is intended to blow out the spray-gun after the 
cleaning procedure.

–  The air-gun on the right side of the unit (item 12 illustration 

1) is during transport placed inside the unit. Take it out, 
and fasten it with the magnet in a convenient place on the 
right side. The air-line for the air-gun can be routed either 
outside the side-wall, or through the gap between the front 
lid and the side wall.

 

This air-gun is intended to blow the spray-gun dry after the 
cleaning procedure.

PLACING THE UNIT

The DRESTER BOXER QUATTRO S is equipment Category 2 (ref. 
ATEX-directive 2014/34/EU) and may therefore be placed in 
locations classified as Zone 1 (ref. ATEX-directive 1999/92 EC). 
If the DRESTER BOXER QUATTRO S is installed in locations 
classified as Zone 2 or in unclassified locations, the following 
is valid provided that the ventilation of the unit is installed as 
described further down in this manual:
The space within 1 m of the DRESTER BOXER QUATTRO S is to 
be classified as Zone 2, and the inside of the ducting as Zone 1 
(see illustration 17). 
Within these areas, all equipment such as electrical items must 
be approved for the Zones described. Equipment that generates 
naked flames or sparks (e.g. welding or grinding equipment) 
may not be used in this area. Smoking is not permitted. If in 
any doubt, please contact the local fire service authorities for 
advice.
This manual is part of the unit and must be available at all 
times.

 

INSTALLATION

Compressed air

The unit must be connected to compressed air of 7–12 bar 
(110–180 psi). When in use, the unit consumes 150 litres/
min (6 cfm) of air (450 litres/min (16 cfm) if connected to a 
DRESTER AIRVENT 11660). 

The air is to be connected to the moisture trap inside the unit 
(item 1 illustration 2). To access this point, remove the front 
panel (item 5 illustration 1) by lifting it up-and-out. The air-line 
can be led into this point via the slots on the side of the unit, 
or through the open back of the unit. In either case, make sure 
that the air-line do not bend the hoses or in any other way 
harm the pneumatic system of the unit. 

To prevent pressure drops, the air line and couplings must be 
adequately dimensioned. The regulator on the unit is pre-set to 
6.5 bar (100 psi). This is the optimal setting and must not be 
altered.
 
The compressed air supplied to the unit must be clean and dry. 
If it is not first led through a water trap and filter, it may cause 
damage to the pneumatic components of the unit, which will 
invalidate any warranty claims.

Fit a connector to the air-line on the left side of the unit (item 
4 illustration 1). This air-line is intended to blow out the spray 
gun after the cleaning procedure.

Grounding the unit

Make sure that the unit is properly grounded by using the 
grounding cable (item 6 illustration 2).

ENGLISH

Ref: Illustration attachment 17014

Содержание Boxer Quattro S DB44S

































Отзывы: