B
roadband Power Technology
,
3945
North 900 West, Pleasant View, UT 84414-1055 Ph: 801.732.0924 Fx: 801.732.0891
Website: http://www.bptec.com Email: [email protected]
5
Interconnect Diagram for the Dressler
ARA 60 and ARA 2000 antenna Installation
Provides continuous coverage from 40 kHz to 2000 MHz
ARA
2000
VHF
UHF
RSM 2000
PS-120
YOUR
HF/UHF
RECEIVER
ARA
60
VLF
HF
RSM 2000
PS-120
To 120 VAC line
UHF input -
Use BNC to
N(M) cable
“To Active Ant”
N to BNC
(Adapter)
RG-58/U
Coax
“To Active Ant”
N to BNC
(Adapter)
RG-58/U or
LMR-240/UF
Coax
To 120 VAC line
HF input -
Use BNC to
PL-259 cable
N (M) to N (F)
Notes:
1. A 0.75 amp slow-blow fuse is located inside of the RSM-2000 unit. This may be accessed for inspection or replacement by removing the top cover on the RSM unit. Replacement fuses are
available from BPT or you may use Radio Shack (or equivalent) P/N 279-1062 0.75 A, slow-blow, 5X20 mm, GMA type.
2. The RSM-2000 also contains a variable RF attenuator for use when the receiver in use has a low tolerance for external gain. The unit is set for maximum signal at the time of test. To
decrease the signal, turn the blue slug (located on the side of the RSM-2000) in the counter clockwise direction. The attenuation range is typically about 0-20 dB.
DC Supply
DC Supply
