Dresser Roots DVJ WHISPAIR, Установка, эксплуатация и обслуживание

Страница: 21 / 25

22 | Dresser Roots
Item
Number
Quantity Used Identification
Item
Number
Quantity Used Identification
1 1 Headplate - Gear End 62 1 Spacer Sleeve - Outboard Brng.
1A 1 Headplate - Drive End 63 1 Bearing Carrier - Extended Drive
2 1 Cylinder 64 2 Dowel Pin - End Cover
3 1 Gearbox 66 1 Air Vent - End Cover (Belted)
5 1 End Cover - Driving (Cplg.) 67 1 Plug - Gearbox Drain
5A 1 End Cover - Driven Shaft 69 4 Plug - Bearing Housing
6 4a Bearing Carrier 70 4 Plug - Instrument Taps
7 2 Impeller 71 2 Leveling Label
9 2 Timing Gear 72 4 Set Screw - Leveling
10 2 Timing Gear Locking Assembly 73
12 2 Stub Shaft - Gear End 74
13 1 Stub Shaft - Driving 75
14 1 Stub Shaft - Driven 76
15 77 1 or 2c Spacer Ring - Drive End Bearing
16 1 Key - Drive Sheave or Coupling 78
17 4 halves Shims – Brng. Carrier, Drive End 80
18 1 Gasket - Gearbox Flange 81 2 Gasket - Brng. Carrier, Gear End
22 Varies Capscrew - End Cover (Soc. Hd.) 82 2 Oil Dam - Gear End Bearing
23 1 Shaft Seal - Outboard 83 2 Oil Control Shield
24 2 Bearing Locknut 84 1 or 2b Oil Pan (Secondary Sump)
25 2 Bearing Lockwasher 85 4 Capscrew - Oil Pan
26 8 Lockwasher - Brng. Carrier (See 49) 86 Varies Self-Tap Screw - Oil Pan
27 4 Shaft Seal - Inboard 87 1 Gauge Oil Level - Gear End
28 2 Air Vent - Drive End 88 6 Plug - Drive end Fill & Drain
29 2 Eyebolt - Lifting 89 2 Locking Nut (See 96)
30 Varies Capscrew - Gearbox & Headplate Fig. 90 2 Gauge Oil Level - Drive End
31 4 Bearing - Roller 91
34 1 Nameplate 92 1 Lube Nameplate - Gear End
35 6 Drive Screw - Nameplate & Arrow 93 1 Lube Nameplate - Drive Enc
36 8 or 0d Dowel Pin - Flange Locating 94 Varies Manifold
37 1 Vent Plug - Gearbox 95
42 Varies Capscrew - Stub Shaft (Soc. Hd.) 96 2 Slinger Set Screw (See 89)
43 Varies Taper Pin - Stub Shaft, Gear End 100 4 or 0d Dowel Pin - Flange Locating
45 101 2 Locknut Gear
49 16 Capscrew - Brng. Carrier (See 26) 109 4 Piston Ring Seal
56 1 Rotation Arrow 110 1 or 0e Oil Shroud
58 1 End Cover - Driving (Belted) 111 1 or 0e Oil Shield
60 1 Bearing - Inboard 132 2 on IBB Trico Oiler
61 2 O-ring - End Cover
Parts Indentification List for Figures 15, 16, 17 or 18
a. All units having extended shaft for belt drive, use three item 6 and one item 63.
b. Vertical style units, use one item 84. Horizontal units, require two item 84.
c. Used on sized 1000 through 1400 only.
d. Units of frame sizes 1000 through 1400 except 1442 use four item 100. Frames 1600 through 2000 and 1442 use eight item 36.
e. Vertical style units use one item 110 and one item 111. Not required on horizontal units.
f.
Inboard bearing item 60 is a double row spherical type on current production units, and the cylindrical roller bearing on older units will be
replaced with the new spherical roller bearing.