4
5
If there is a loose fit between the plug and the socket
or the plug becomes very hot, the socket may need
to be replaced. Check with a qualified electrician to
replace the socket.
A loose fitting outlet can cause the plug to overheat or
cause a fire. Be sure plug fits tight in the outlet.
It is normal for the plug and cord to feel warm to the
touch. A plug or cord which becomes hot to the touch
or becomes distorted in shape may be a result of a
worn electrical outlet. Worn outlets or receptacles
should be replaced prior to further use of the heater.
Plugging the heater into a worn outlet / receptacle may
result in overheating of the power cord or fire.
The output of this heater may vary and its temperature
may become hot enough to burn exposed skin. Use of
this heater is not recommended for persons with a high
sensitivity to heat or an inability to react to avoid burns.
should be replaced prior to further use of the heater.
Plugging the heater into a worn outlet / receptacle may
result in overheating of the power cord or fire.
Ensure the heater is on a stable, secure surface to
eliminate the potential of tipping it over.
Make sure that no pieces of polystyrene or other
packaging material have been left between elements
of the appliance. It may be necessary to pass over the
appliance with a vacuum cleaner.
Do not attempt to modify or repair the product by
yourself. Doing so could void the warranty and cause
damage or personal injury. Only a repair technician may
disassemble or repair this product.
Choking hazard – This remote control unit contains
a small battery. Keep the remote control away from
children and do not swallow the battery. If the battery
is swallowed seek medical advice at once.
DANGER - High temperatures may be generated
under certain abnormal conditions. Do not
partially or fully cover or obstruct the front of
this heater.
READ AND SAVE
THESE
INSTRUCTIONS
NOTE:
There may be a trace of smoke or odor when the
unit is first operated. This indicates that a drop of oil fell
on the heating coil during the manufacturing process. It
will quickly evaporate and should not re-occur.
IMPORTANT
- This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to rig this safety
feature.
If the machine is not working as it should, has received a
sharp blow, has been dropped, damaged, left outdoors,
or dropped into water, do not use and contact Customer
Support.
