background image

8

Your Dremel™ product is warranted against defective material or workmanship for a period of one year from date of purchase. In

the event of a failure of a product to conform to this written warranty, please take the following action:
1.  DO NOT return your product to the place of purchase.
2.  Carefully package the product by itself, with no other items, and return it, freight prepaid, along with:

A.  A copy of your dated proof of purchase (please keep a copy for yourself).
B.  A written statement about the nature of the problem.
C.  Your name, address and phone number to:

UNITED STATES

Dremel Service Center

Dremel Service Center

4915 21st Street

OR

4631 E. Sunny Dune

Racine, WI 53406 

Palm Springs, CA 92264

CANADA

OUTSIDE

Giles Tool Agency

CONTINENTAL UNITED STATES

6520 Lawrence Av. East

See your local distributor or write to

Scarborough, Ont

Dremel, 4915 21st Street

Canada M1C 4A7

Racine, WI 53406

We recommend that the package be insured against loss or in transit damage for which we cannot be responsible.
This warranty applies only to the original registered purchaser. DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING,

ACCIDENT, ABUSE, NEGLIGENCE, UNAUTHORIZED REPAIRS OR ALTERATIONS, UNAPPROVED ATTACHMENTS OR

OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WAR-

RANTY.
No employee, agent, dealer or other person is authorized to give any warranties on behalf of Dremel. If Dremel inspection shows

that the problem was caused by problems with material or workmanship within the limitations of the warranty, Dremel will repair

or replace the product free of charge and return product prepaid. Repairs made necessary by normal wear or abuse, or repair

for product outside the warranty period, if they can be made, will be charged at regular factory prices.
DREMEL MAKES NO OTHER WARRANTY OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, AND ALL IMPLIED WAR-

RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE ABOVE MENTIONED

OBLIGATION ARE HEREBY DISCLAIMED BY DREMEL AND EXCLUDED FROM THIS LIMITED WARRANTY.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. The obligation of the

warrantor is solely to repair or replace the product. The warrantor is not liable for any incidental or consequential damages due to any

such alleged defect. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limita-

tions or exclusion may not apply to you.
For prices and warranty fulfillment in the continental United States, contact your local Dremel distributor.

DREMEL™ LIMITED WARRANTY

SERVICE PARTS & DIAGRAM

88

CLEANING

To avoid accidents, always

disconnect the tool from

the power supply before cleaning or per-

forming any maintenance.
The tool may be cleaned most effectively

with compressed dry air. Always wear safe-

ty goggles when cleaning tools with com-

pressed air.

WARNING

!

Ventilation openings and switch levers must be

kept clean and free of foreign matter. Do not

attempt to clean by inserting pointed objects

through openings.

Certain cleaning agents

and solvents damage plas-

tic parts. Some of these are gasoline, car-

bon tetrachloride, chlorinated cleaning sol-

vents, ammonia and household detergents

containing ammonia.

WARNING

!

DM 2610922740 8-04 E.qxd  8/10/04  8:20 AM  Page 8

Содержание MS400









Отзывы: