32
Starting a Massage
• Ensure remote power in ON. The Power/Pause button will glow white.
• Use the Remote navigation arrows to scroll through the menus. As you navigate the menus, the black highlight
indicates where the cursor is within the menu.
• Once your desired selection is highlighted, press the OK button to activate the selection.
• Upon activation, a green dot will appear to the right of the currently running selection(s), and the upper section of
the remote screen will display the name of the massage(s) selected. The timer in the upper right corner indicates
estimated massage duration.
• Choreographed massages that automatically combine the massage mechanism, air massage, and other features,
are offered in the Programmed & Focused menus (except in Full Body Air, which is an air massage only program).
• Manual menu options activate a specific back mechanism function or set of functions. Neither the air massage,
or the additional roller motor mechanisms in the chair (foot, calf, neck roller), are automatically combined.
• Massages within the Manual Air menu are those that activate only the air cells. Neither the massage mechanism,
or the additional roller motor mechanisms in the chair (foot, calf, neck roller), are automatically combined.
Shoulder Scan & ScanSave
To experience a massage as intended, it is extremely important to define the shoulder position prior to the start of
a massage session. To ensure massage accuracy, please follow the steps below:
When the head pillow is properly placed...
• The massage chair will Auto-Detect shoulder position.
•
Fine Tune Shoulder Position:
Once Auto-Detect is complete, the remote will beep, the roller buttons glow white,
and the help text “Use roller buttons to fine tune shoulder position now” appears at the bottom of the screen. Roller
position can be adjusted by pressing and holding the Roller Up or Down arrows until the mechanism is located in the
proper position at the tops of the shoulder.
When the head pillow is not properly placed OR not being used...
• The Auto-Detect function is disabled and the user must adjust the roller position once the remote starts beeping, the
roller buttons illuminate, and text “Use roller buttons to fine tune shoulder position now” appears at the bottom of
the screen. At this time the roller position can be adjusted by pressing and holding the Roller Down arrow until the
mechanism is located in the proper position at the tops of the shoulder.
• ScanSave remembers your body profile for all massages performed during the same power cycle. The chair will only
scan once while powered on, upon the first Programmed or Focused massage selection. If a second program is
selected the scan from the first program is remembered and used for the new selection. Anytime a new user enters
the chair, the remote, if it has been left on from a previous user, should be powered off and back on to ensure that
the new user is properly scanned.
O P E R A T I O N & U S E
